Update xo_install.sh

removing libfuse2t64 in favor of fuse2fs. 

Needs validation if process still works on Debian 12.12

README.md

@@ -1,39 +1,51 @@
 # Xen-Orchestra (Community Edition) Installer
 
-Xen-Orchestra (Community Edition) allows you to administer Citrix XenServer and XCP-ng as well as backup any VM's running on these systems. 
+Xen-Orchestra (Community Edition) allows you to administer Citrix Hypervisor (aka XenServer) and XCP-ng as well as backup any VM's running on these systems. The single line installation script allows you to go from a bare-minimal installation of [Ubuntu](https://ubuntu.com/download/server) or [Debian (Server)](https://www.debian.org/distrib/netinst) to fully operational XOCE server.
 
-The single line installation script allows you to go from a bare-minimal installation of [Ubuntu](https://ubuntu.com/download/server) or [Debian (Server)](https://www.debian.org/distrib/netinst) to fully operational XOCE server. Run the following steps from a root shell.
+## System Minimum Requirements for installation
 
-    curl https://raw.githubusercontent.com/Jarli01/xenorchestra_installer/master/xo_install.sh | sudo bash
+* 1 vCPU
-    <password>
+* 3 GiB RAM
+* 10 GiB disk space
+
+## System recommendations for operation
+
+* 2 vCPU recommended 
+* 3 GiB of RAM (for environments containing 500+ VMs increase the amount RAM)
+* 20 GiB disk space (for system updates)
+
+## Assumptions
+
+* We assume you have a Virtual or physical server running a currently supported Ubuntu or Debian server installation with internet connectivity
+* You've read this community and understand what installation entails and does on your soon to be XOCE server
+
+## Installation
+ 
+Run the following steps from a root shell on your **Ubuntu or Debian** host.
+
+	sudo bash
+	bash -c "$(curl https://raw.githubusercontent.com/Jarli01/xenorchestra_installer/master/xo_install.sh)"
     
 The default username and password are applied, admin@admin.net and admin for the password
-    
+
 If you don't want NFS capabilities run ```sudo apt-get remove nfs-common```.
 
 * Do not use LAMP
 * SSH Access is optional, but highly recommended
 
-# Declaration
+## Updates
 
-This script automates the manual process which can be [found here](https://xen-orchestra.com/docs/from_the_sources.html) as well as removes a few feature restrictions that otherwise would need to be changed manually if following the manual installation process. This script is not officially supported by the Vates team, but is supported by this community. 
+To maintain your installation from Source or from this repo. (either prepackaged or scripted installation) we recommend using the update script which this community maintains. This can be [found here](https://github.com/Jarli01/xenorchestra_updater) and doesn't require you to download or install a separate package to your XOCE installation. Simply run it via shell session of your XOCE host.
 
-# Prepacked Installation option
+# Declarations
 
-To download and deploy a prepacked Ubuntu 20.04 installation of Xen Orchestra (CE) run the below from an SSH session on your XCP-NG/Citrix Hypervisor (XenServer) host(s)
+This script automates the manual process which can be [found here](https://docs.xen-orchestra.com/installation) as well as removes a few feature restrictions that otherwise would need to be changed manually if following the manual installation process. This script is not officially supported by the Vates team, but is supported by this community. 
-
-    bash -c "$(curl -s https://raw.githubusercontent.com/Jarli01/xenorchestra_installer/master/xoce)"
-
-SHA256 Checksum "0ae7e283518f9b12b9a3756c58fbf357aea852df062be842adbb45eb1e42dcec"
-
-For verification of SHA256 checksum the XVA file can be downloaded directly and verified/imported. 
-XVA Direct Download https://srv-file19.gofile.io/download/Kt6nJu/20200722T183158Z%20-%20XOCE.xva
 
 # Self-signed SSL 
 
-If you are running this internally and need SSL (recommended) follow the below steps to create a self-signed SSL key and certificate; while browsers will still say the connection is unsecured, this is because the certificate isn't from a public authority and is on your LAN. Alternatively a reverse proxy can be used for public facing installations.  
+If you are running this internally and need SSL (recommended) follow the below steps to create a self-signed SSL key and certificate; while browsers will still say the connection is unsecured, this is because the certificate isn't from a public authority and is on your LAN. You can add this cert to your systems root authority if it want to to remove the warning. Alternatively a reverse proxy can be used for public facing installations.  
 
-## Generate your key and cert
+## Generate your key and cert from your XOCE installation
 
     sudo openssl req -x509 -nodes -days 3650 -newkey rsa:4096 -keyout /etc/ssl/private/key.pem -out /etc/ssl/certs/certificate.pem
     
@@ -71,4 +83,11 @@ While the goal initially was to have a solution as close to XOA as possible, wit
 
 To keep XOCE up to date I recommend that anyone who's used this installation script or the sources installation to use this: https://github.com/Jarli01/xenorchestra_updater
 
+## Adding XOCE v6 to your installation (this is a Work In Progress by Vates)
+
+	cd /opt/xen-orchestra
+	yarn run turbo run build --filter @xen-orchestra/web
+
+Once the installation is completed, you can then go to [https://your-host-ip/v6](https://your-host-ip/v6)
+
 

xo_install.sh

@@ -5,7 +5,7 @@
 
 # Check for required memory
 totalk=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
-if [ "$totalk" -lt "3000000" ]; then echo "XOCE Requires at least 3GB Memory!"; exit 1; fi 
+if [ "$totalk" -lt "2000000" ]; then echo "XOCE Requires at least 2GB Memory!"; exit 1; fi 
 
 distro=$(/usr/bin/lsb_release -is)
 if [ "$distro" = "Ubuntu" ]; then /usr/bin/add-apt-repository multiverse; fi
@@ -13,7 +13,7 @@ if [ "$distro" = "Ubuntu" ]; then /usr/bin/add-apt-repository multiverse; fi
 xo_branch="master"
 xo_server="https://github.com/vatesfr/xen-orchestra"
 n_repo="https://raw.githubusercontent.com/tj/n/master/bin/n"
-yarn_repo="deb https://dl.yarnpkg.com/debian/ stable main"
+yarn_repo="deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/yarnkey.gpg] https://dl.yarnpkg.com/debian stable main"
 yarn_gpg="https://dl.yarnpkg.com/debian/pubkey.gpg"
 n_location="/usr/local/bin/n"
 xo_server_dir="/opt/xen-orchestra"
@@ -27,7 +27,7 @@ xo_service="xo-server.service"
 #Install yarn
 cd /opt
 
-/usr/bin/curl -sS $yarn_gpg | apt-key add -
+/usr/bin/curl -sSL $yarn_gpg | gpg --dearmor | tee /usr/share/keyrings/yarnkey.gpg >/dev/null
 echo "$yarn_repo" | tee /etc/apt/sources.list.d/yarn.list
 /usr/bin/apt-get update
 /usr/bin/apt-get install --yes yarn
@@ -43,7 +43,7 @@ n lts
 ln -s /usr/bin/node /usr/local/bin/node
 
 # Install XO dependencies
-/usr/bin/apt-get install --yes build-essential redis-server libpng-dev git python2-minimal libvhdi-utils nfs-common lvm2 cifs-utils
+/usr/bin/apt-get install --yes build-essential redis-server libpng-dev git python3-minimal libvhdi-utils nfs-common lvm2 cifs-utils openssl fuse2fs
 
 /usr/bin/git clone -b $xo_branch $xo_server
 
@@ -71,7 +71,9 @@ for source in $(ls -d /opt/xen-orchestra/packages/xo-server-*); do
     fi
 done
 
-if [[ ! -e $systemd_service_dir/$xo_service ]] ; then
+if [[ -e $systemd_service_dir/$xo_service ]] ; then
+  rm $systemd_service_dir/$xo_service
+fi
 
 /bin/cat << EOF >> $systemd_service_dir/$xo_service
 # Systemd service for XO-Server.
@@ -82,14 +84,15 @@ After=network-online.target
 
 [Service]
 WorkingDirectory=/opt/xen-orchestra/packages/xo-server/
-ExecStart=/usr/local/bin/node ./bin/xo-server
+ExecStart=/usr/local/bin/node ./dist/cli.mjs
+
 Restart=always
 SyslogIdentifier=xo-server
 
 [Install]
 WantedBy=multi-user.target
 EOF
-fi
+
 
 /bin/systemctl daemon-reload
 /bin/systemctl enable $xo_service

xoce-import.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-XOCE_URL=https://srv-file19.gofile.io/download/Kt6nJu/20200722T183158Z%20-%20XOCE.xva
+XOCE_URL=https://nc.nl.tab.digital/s/WQmCwmH4e9EdTTA/download
 
 # Welcome message
 printf "\n\033[1mWelcome to the XOCE auto-deploy script!\033[0m\n\n"
@@ -10,7 +10,7 @@ then
   echo
   echo 'Sorry, the xe command is required for this auto-deploy.'
   echo
-  echo 'Please, make sure you are on a XenServer host.'
+  echo 'Please, make sure you are on a XCP-ng/XenServer host.'
   echo
   exit 1
 fi
@@ -18,8 +18,8 @@ fi
 # Basic check: are we on a XS host?
 if grep -Fxq "XenServer" /etc/issue
 then
-  printf "\nSorry, it seems you are not on a XenServer (XCP-ng) host.\n\n"
+  printf "\nSorry, it seems you are not on a XCP-ng/XenServer host.\n\n"
-  printf "\n\033[1mThis script is meant to be deployed on XenServer (or XCP-ng) only.\033[0m\n\n"
+  printf "\n\033[1mThis script is meant to be deployed on XCP-ng or XenServer only.\033[0m\n\n"
   exit 1
 fi
 
@@ -36,7 +36,7 @@ then
   read -p "dns? [8.8.8.8] " dns
   dns=${dns:-8.8.8.8}
 else
-  printf "\nYour XOCE will be started using DHCP\n\n"
+  printf "\nYour XOCE installation will be started using DHCP\n\n"
 fi
 
 # Downloading and importing the VM
@@ -56,7 +56,7 @@ fi
 import=$?
 if [ $import -ne 0 ]
 then
-  printf "\n\nAuto deploy failed. Please contact us on xen-orchestra.com live chat for assistance.\nError:\n\n %s\n\n" "$uuid"
+  printf "\n\nAuto deploy failed. Please contact us on https://github.com/Jarli01/xenorchestra_installer/issues for assistance.\nError:\n\n %s\n\n" "$uuid"
   exit 0
 fi
 
@@ -75,7 +75,7 @@ sleep 2
 
 # Waiting for the VM IP from Xen tools for 60 secs
 
-printf "Waiting for your XOCE to be ready…\n"
+printf "Waiting for XOCE to be ready…\n"
 url=$(xe vm-param-get uuid=$uuid param-name=networks param-key=0/ip 2> /dev/null)
 wait=0
 limit=60
@@ -95,7 +95,7 @@ done
 
 if [ "$ip" != 'dhcp' ]
 then
-  printf "\n\033[1mYour XOCE is ready on https://%s/\033[0m\n" "$ip"
+  printf "\n\033[1mYour XOCE is ready at https://%s/\033[0m\n" "$ip"
   # clean the xenstore data
   xe vm-param-remove param-name=xenstore-data param-key=vm-data/dns param-key=vm-data/ip param-key=vm-data/netmask param-key=vm-data/gateway uuid=$uuid
 
@@ -105,7 +105,7 @@ elif [ -z "$url" ]
 then
   printf "\n\033[1mYour XOCE booted but we couldn't fetch its IP address\033[0m\n"
 else
-  printf "\n\033[1mYour XOCE is ready on https://%s/\033[0m\n" "$url"
+  printf "\n\033[1mYour XOCE is ready at https://%s/\033[0m\n" "$url"
 fi
 printf "\nDefault UI credentials: admin@admin.net/admin\nDefault console credentials: xoce/xoce\n"
 printf "\nVM UUID: %s\n\n" "$uuid"