Delete import

Replicates the direct import process

README.md

@@ -1,69 +1,22 @@
 # Xen-Orchestra (Community Edition) Installer
 
-Xen-Orchestra (Community Edition) allows you to administer Citrix Hypervisor (aka XenServer) and XCP-ng as well as backup any VM's running on these systems. The single line installation script allows you to go from a bare-minimal installation of [Ubuntu](https://ubuntu.com/download/server) or [Debian (Server)](https://www.debian.org/distrib/netinst) to fully operational XOCE server.
+Xen-Orchestra (Community Edition) allows you to administer Citrix XenServer and XCP-ng as well as backup any VM's running on these systems. 
 
-## System Minimum Requirements for installation
+The single line installation script allows you to go from a bare-minimal installation of [Ubuntu](https://ubuntu.com/download/server) or [Debian (Server)](https://www.debian.org/distrib/netinst) to fully operational XOCE server. Run the following steps from a root shell.
 
-* 1 vCPU
+    curl https://raw.githubusercontent.com/Jarli01/xenorchestra_installer/master/xo_install.sh | sudo bash
-* 3 GiB RAM
+    <password>
-* 10 GiB disk space
-
-## System recommendations for operation
-
-* 2 vCPU recommended 
-* 3 GiB of RAM (for environments containing 500+ VMs increase the amount RAM)
-* 20 GiB disk space (for system updates)
-
-## Assumptions
-
-* We assume you have a Virtual or physical server running a currently supported Ubuntu or Debian server installation with internet connectivity
-* You've read this community and understand what installation entails and does on your soon to be XOCE server
-
-## Installation
- 
-Run the following steps from a root shell on your **Ubuntu or Debian** host.
-
-	sudo bash
-	bash -c "$(curl https://raw.githubusercontent.com/Jarli01/xenorchestra_installer/master/xo_install.sh)"
     
 The default username and password are applied, admin@admin.net and admin for the password
-
+    
 If you don't want NFS capabilities run ```sudo apt-get remove nfs-common```.
 
 * Do not use LAMP
 * SSH Access is optional, but highly recommended
 
-## Updates
+# Declaration
 
-To maintain your installation from Source or from this repo. (either prepackaged or scripted installation) we recommend using the update script which this community maintains. This can be [found here](https://github.com/Jarli01/xenorchestra_updater) and doesn't require you to download or install a separate package to your XOCE installation. Simply run it via shell session of your XOCE host.
+This script automates the manual process which can be [found here](https://xen-orchestra.com/docs/from_the_sources.html) as well as removes a few feature restrictions that otherwise would need to be changed manually if following the manual installation process. This script is not officially supported by the Vates team, but is supported by this community. 
-
-# Declarations
-
-This script automates the manual process which can be [found here](https://docs.xen-orchestra.com/installation) as well as removes a few feature restrictions that otherwise would need to be changed manually if following the manual installation process. This script is not officially supported by the Vates team, but is supported by this community. 
-
-# Self-signed SSL 
-
-If you are running this internally and need SSL (recommended) follow the below steps to create a self-signed SSL key and certificate; while browsers will still say the connection is unsecured, this is because the certificate isn't from a public authority and is on your LAN. You can add this cert to your systems root authority if it want to to remove the warning. Alternatively a reverse proxy can be used for public facing installations.  
-
-## Generate your key and cert from your XOCE installation
-
-    sudo openssl req -x509 -nodes -days 3650 -newkey rsa:4096 -keyout /etc/ssl/private/key.pem -out /etc/ssl/certs/certificate.pem
-    
-Now edit the xo-server.toml file
-
-    vi /opt/xen-orchestra/packages/xo-server/.xo-server.toml
-    
-Comment-out or edit the port from 80 to 443 and add the cert and key to the appropriate locations within this file.
-    
-    port = 443
-    cert = '/etc/ssl/certs/certificate.pem'
-    key = '/etc/ssl/private/key.pem'
-    
-Restart xo-server.service
-
-    systemctl restart xo-server.service
-
-Reload your XOCE website using SSL (https://your-host-ip)
 
 # Problems?
 
@@ -83,11 +36,4 @@ While the goal initially was to have a solution as close to XOA as possible, wit
 
 To keep XOCE up to date I recommend that anyone who's used this installation script or the sources installation to use this: https://github.com/Jarli01/xenorchestra_updater
 
-## Adding XOCE v6 to your installation (this is a Work In Progress by Vates)
-
-	cd /opt/xen-orchestra
-	yarn run turbo run build --filter @xen-orchestra/web
-
-Once the installation is completed, you can then go to [https://your-host-ip/v6](https://your-host-ip/v6)
-
 

xo_install.sh

@@ -1,184 +1,101 @@
 #!/bin/bash
-set -euo pipefail
-IFS=$'\n\t'
 
-# --- Check if we were effectively run as root ---
+# Check if we were effectively run as root
-[ "${EUID:-$(id -u)}" = 0 ] || { echo "This script needs to be run as root!"; exit 1; }
+[ $EUID = 0 ] || { echo "This script needs to be run as root!"; exit 1; }
 
-# --- Check for required memory ---
+# Check for required memory
 totalk=$(awk '/^MemTotal:/{print $2}' /proc/meminfo)
-if [ "$totalk" -lt "2000000" ]; then echo "XOCE Requires at least 2GB Memory!"; exit 1; fi
+if [ "$totalk" -lt "3000000" ]; then echo "XOCE Requires at least 3GB Memory!"; exit 1; fi 
-export DEBIAN_FRONTEND=noninteractive
 
-# --- OS detection ---
+distro=$(/usr/bin/lsb_release -is)
-if [ -f /etc/os-release ]; then
+if [ "$distro" = "Ubuntu" ]; then /usr/bin/add-apt-repository multiverse; fi
-  . /etc/os-release
-  distro="$ID"
-  version="$VERSION_ID"
-else
-  echo "Unable to detect OS via /etc/os-release"; exit 1
-fi
 
-# --- Deb Point Release Check ---
-if [ "$distro" = "debian" ] && [ -r /etc/debian_version ]; then
-  deb_point=$(sed -E 's/^([0-9]+(\.[0-9]+)?).*/\1/' /etc/debian_version)
-  version="${deb_point:-$version}"
-fi
-
-echo "Detected: $distro $version"
-
-# --- Version compare helper ---
-version_ge() { dpkg --compare-versions "$1" ge "$2"; }
-
-# --- Minimum supported versions ---
-case "$distro" in
-  debian)
-    version_ge "$version" "12.5" || { echo "Debian $version too old (min 12.5)"; exit 1; }
-    ;;
-  ubuntu)
-    version_ge "$version" "24.04" || { echo "Ubuntu $version too old (min 24.04)"; exit 1; }
-    ;;
-  *)
-    echo "Unsupported distribution: $distro"; exit 1
-    ;;
-esac
-
-# --- Helper: apt install if available ---
-apt_install_if_available() {
-  local pkg="$1"
-  /usr/bin/apt-get update -qq
-  if /usr/bin/apt-cache policy "$pkg" 2>/dev/null | grep -q 'Candidate:'; then
-    echo "Installing $pkg"
-    /usr/bin/apt-get --yes install "$pkg"
-    return 0
-  else
-    return 1
-  fi
-}
-
-# --- FUSE runtime install ---
-install_fuse_runtime() {
-  echo "Ensuring FUSE runtime (libfuse.so.2)..."
-  for p in libfuse2 libfuse2t64; do
-    apt_install_if_available "$p" && break
-  done
-  /sbin/ldconfig -v 2>/dev/null || true
-  if ! /sbin/ldconfig -p | grep -Fq 'libfuse.so.2'; then
-    echo "ERROR: libfuse.so.2 not found. XO requires FUSE2 runtime."
-    exit 1
-  fi
-  echo "libfuse.so.2 verified."
-}
-
-# --- Install dependencies ---
-install_deps() {
-  echo "Installing general dependencies..."
-  /usr/bin/apt-get update
-  /usr/bin/apt-get --yes install git curl apt-transport-https gnupg ca-certificates
-
-  case "$distro" in
-    debian)
-      echo "Installing Debian-specific dependencies..."
-      install_fuse_runtime
-      /usr/bin/apt-get --yes install libnbd-bin nbdkit nbdkit-plugin-vddk || true
-      ;;
-    ubuntu)
-      echo "Installing Ubuntu-specific dependencies..."
-      /usr/bin/apt-get --yes install software-properties-common
-      /usr/bin/add-apt-repository -y multiverse || true
-      /usr/bin/apt-get update
-      install_fuse_runtime
-      /usr/bin/apt-get --yes install libnbd-bin nbdkit || true
-      ;;
-  esac
-
-  echo "Installing XOCE common dependencies..."
-  /usr/bin/apt-get --yes install \
-    build-essential redis-server libpng-dev python3-minimal \
-    libvhdi-utils nfs-common lvm2 cifs-utils openssl || true
-}
-
-install_deps
-
-# --- Script variables ---
 xo_branch="master"
 xo_server="https://github.com/vatesfr/xen-orchestra"
 n_repo="https://raw.githubusercontent.com/tj/n/master/bin/n"
-yarn_repo="deb [arch=$(dpkg --print-architecture) signed-by=/usr/share/keyrings/yarnkey.gpg] https://dl.yarnpkg.com/debian stable main"
+yarn_repo="deb https://dl.yarnpkg.com/debian/ stable main"
 yarn_gpg="https://dl.yarnpkg.com/debian/pubkey.gpg"
 n_location="/usr/local/bin/n"
 xo_server_dir="/opt/xen-orchestra"
 systemd_service_dir="/lib/systemd/system"
 xo_service="xo-server.service"
 
-# --- Install Yarn ---
+# Ensures that Yarn dependencies are installed
+/usr/bin/apt-get update
+/usr/bin/apt-get --yes install git curl apt-transport-https gnupg
+
+#Install yarn
 cd /opt
-/usr/bin/curl -sSL "$yarn_gpg" | gpg --dearmor | tee /usr/share/keyrings/yarnkey.gpg >/dev/null
+
+/usr/bin/curl -sS $yarn_gpg | apt-key add -
 echo "$yarn_repo" | tee /etc/apt/sources.list.d/yarn.list
 /usr/bin/apt-get update
 /usr/bin/apt-get install --yes yarn
 
-# --- Install Node via n ---
+# Install n
-/usr/bin/curl -o "$n_location" "$n_repo"
+/usr/bin/curl -o $n_location $n_repo
-/bin/chmod +x "$n_location"
+/bin/chmod +x $n_location
-/usr/local/bin/n lts
 
-# Ensure new Node is used
+# Install node via n
-export PATH="/usr/local/bin:$PATH"
+n lts
-hash -r
 
-node_version=$(node -v | sed 's/v//')
+# Symlink node directories
-dpkg --compare-versions "$node_version" lt "20.18" && {
+ln -s /usr/bin/node /usr/local/bin/node
-  echo "ERROR: Node version $node_version too old. XO requires >=20.18"
-  exit 1
-}
 
-# --- Clone & build XO ---
+# Install XO dependencies
-/usr/bin/git clone -b "$xo_branch" "$xo_server" "$xo_server_dir" 2>/dev/null || true
+/usr/bin/apt-get install --yes build-essential redis-server libpng-dev git python2-minimal libvhdi-utils nfs-common lvm2 cifs-utils
-cd "$xo_server_dir"
+
+/usr/bin/git clone -b $xo_branch $xo_server
+
+cd $xo_server_dir
 /usr/bin/yarn
 /usr/bin/yarn build
 
 cd packages/xo-server
-cp -f sample.config.toml .xo-server.toml
+cp sample.config.toml .xo-server.toml
 
 dest=/usr/local/lib/node_modules/
-mkdir -p "$dest"
+#Create node_modules directory if doesn't exist
+mkdir -p $dest
 
+# Plugins to ignore
 ignoreplugins=("xo-server-test")
-for source in $(ls -d /opt/xen-orchestra/packages/xo-server-* 2>/dev/null || true); do
+
-  plugin=$(basename "$source")
+# Symlink all plugins
-  [[ " ${ignoreplugins[*]} " == *" $plugin "* ]] && continue
+for source in $(ls -d /opt/xen-orchestra/packages/xo-server-*); do
-  ln -sfn "$source" "$dest"
+  plugin=$(basename $source)
+  if [[ "${ignoreplugins[@]}" =~ $plugin ]]; then
+      echo "Ignoring $plugin plugin"
+  else
+      ln -s "$source" "$dest"
+    fi
 done
 
-# --- systemd service ---
+if [[ ! -e $systemd_service_dir/$xo_service ]] ; then
-if [[ -e "$systemd_service_dir/$xo_service" ]]; then
+
-  rm -f "$systemd_service_dir/$xo_service"
+/bin/cat << EOF >> $systemd_service_dir/$xo_service
-fi
+# Systemd service for XO-Server.
 
-/bin/cat << 'EOF' > "$systemd_service_dir/$xo_service"
 [Unit]
 Description= XO Server
 After=network-online.target
 
 [Service]
 WorkingDirectory=/opt/xen-orchestra/packages/xo-server/
-ExecStart=/usr/local/bin/node ./dist/cli.mjs
+ExecStart=/usr/local/bin/node ./bin/xo-server
 Restart=always
 SyslogIdentifier=xo-server
 
 [Install]
 WantedBy=multi-user.target
 EOF
+fi
 
 /bin/systemctl daemon-reload
-/bin/systemctl enable "$xo_service"
+/bin/systemctl enable $xo_service
-/bin/systemctl start "$xo_service" || (sleep 2 && /bin/systemctl start "$xo_service")
+/bin/systemctl start $xo_service
+
+echo ""
+echo ""
+echo "Installation complete, open a browser to:" && hostname -I && echo "" && echo "Default Login:"admin@admin.net" Password:"admin"" && echo "" && echo "Don't forget to change your password!"
 
-echo
-echo "Installation complete, open a browser to:" && hostname -I
-echo
-echo 'Default Login: "admin@admin.net"  Password: "admin"'
-echo
-echo "Don't forget to change your password!"

xoce

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-XOCE_URL=https://nc.nl.tab.digital/s/WQmCwmH4e9EdTTA/download
+XOCE_URL=https://archive.org/download/xogithub_gmail_Xoce/xoce
 
 # Welcome message
 printf "\n\033[1mWelcome to the XOCE auto-deploy script!\033[0m\n\n"
@@ -10,7 +10,7 @@ then
   echo
   echo 'Sorry, the xe command is required for this auto-deploy.'
   echo
-  echo 'Please, make sure you are on a XCP-ng/XenServer host.'
+  echo 'Please, make sure you are on a XenServer host.'
   echo
   exit 1
 fi
@@ -18,8 +18,8 @@ fi
 # Basic check: are we on a XS host?
 if grep -Fxq "XenServer" /etc/issue
 then
-  printf "\nSorry, it seems you are not on a XCP-ng/XenServer host.\n\n"
+  printf "\nSorry, it seems you are not on a XenServer (XCP-ng) host.\n\n"
-  printf "\n\033[1mThis script is meant to be deployed on XCP-ng or XenServer only.\033[0m\n\n"
+  printf "\n\033[1mThis script is meant to be deployed on XenServer (or XCP-ng) only.\033[0m\n\n"
   exit 1
 fi
 
@@ -36,7 +36,7 @@ then
   read -p "dns? [8.8.8.8] " dns
   dns=${dns:-8.8.8.8}
 else
-  printf "\nYour XOCE installation will be started using DHCP\n\n"
+  printf "\nYour XOCE will be started using DHCP\n\n"
 fi
 
 # Downloading and importing the VM
@@ -56,7 +56,7 @@ fi
 import=$?
 if [ $import -ne 0 ]
 then
-  printf "\n\nAuto deploy failed. Please contact us on https://github.com/Jarli01/xenorchestra_installer/issues for assistance.\nError:\n\n %s\n\n" "$uuid"
+  printf "\n\nAuto deploy failed. Please contact us on xen-orchestra.com live chat for assistance.\nError:\n\n %s\n\n" "$uuid"
   exit 0
 fi
 
@@ -75,7 +75,7 @@ sleep 2
 
 # Waiting for the VM IP from Xen tools for 60 secs
 
-printf "Waiting for XOCE to be ready…\n"
+printf "Waiting for your XOCE to be ready…\n"
 url=$(xe vm-param-get uuid=$uuid param-name=networks param-key=0/ip 2> /dev/null)
 wait=0
 limit=60
@@ -95,7 +95,7 @@ done
 
 if [ "$ip" != 'dhcp' ]
 then
-  printf "\n\033[1mYour XOCE is ready at https://%s/\033[0m\n" "$ip"
+  printf "\n\033[1mYour XOCE is ready on https://%s/\033[0m\n" "$ip"
   # clean the xenstore data
   xe vm-param-remove param-name=xenstore-data param-key=vm-data/dns param-key=vm-data/ip param-key=vm-data/netmask param-key=vm-data/gateway uuid=$uuid
 
@@ -105,7 +105,7 @@ elif [ -z "$url" ]
 then
   printf "\n\033[1mYour XOCE booted but we couldn't fetch its IP address\033[0m\n"
 else
-  printf "\n\033[1mYour XOCE is ready at https://%s/\033[0m\n" "$url"
+  printf "\n\033[1mYour XOCE is ready on https://%s/\033[0m\n" "$url"
 fi
 printf "\nDefault UI credentials: admin@admin.net/admin\nDefault console credentials: xoce/xoce\n"
 printf "\nVM UUID: %s\n\n" "$uuid"