The filtron target is the SearXNG installation and the default of FILTRON_TARGET
is taken from the YAML configuration ('server.port' & 'server.bind_address').
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Some defaults in the settings.yml are taken from the environment.
By example;
The manage scripts sources the ./utils/brand.env and sets SEARX_PORT
environment. This enviroment *wins over* any settings in a YAML file.
Whe we run a::
make test.robot
The searx/settings_robot.yml is used, in this file the server settings are::
server:
port: 11111
bind_address: 127.0.0.1
To get in use of the 'port: 11111' we have to unset the SEARX_PORT environment
which was sourced before.
The function buildenv.unset_env() can be called in all use cases where the
enviroment from ./utils/brand.env is not wanted. ATM it unset the enviroment
variables::
unset GIT_URL
unset GIT_BRANCH
unset SEARX_URL
unset SEARX_PORT
unset SEARX_BIND_ADDRESS
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Not all settings from the 'brand:' section of the YAML files are needed in the
shell scripts. This patch reduce the variables in ./utils/brand.env to what is
needed. The following ('brand:' settings) can be removed from this file:
- ISSUE_URL
- DOCS_URL
- PUBLIC_INSTANCES
- WIKI_URL
Tasks running outside of an *installed instance*, need the following settings
from the YAML configuration:
- GIT_URL <--> brand.git_url
- GIT_BRANCH <--> brand.git_branch
- SEARX_URL <--> server.base_url (aka PUBLIC_URL)
- SEARX_PORT <--> server.port
- SEARX_BIND_ADDRESS <--> server.bind_address
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Inspect YAML setting <key> from SearXNG instance (${SEARX_SRC})::
utils/searx.sh inspect settings server.base_url
utils/lib_install.sh
should not log on stdout which is used for the output of function
prompt_installation_setting(). Turned build_msg (stdout) into
info_msg (stderr).
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
This patch implements two new commands:
install dot-config :
- copy ./config.sh to ${SEARX_SRC}
- implemented in new function install_DOT_CONFIG
install init-src:
- sync files (SEARX_SRC_INIT_FILES) with ${SEARX_SRC}
- implemented in new function init_SEARX_SRC()
new functions: verify_continue_install() and prompt_installation_status()
These functions are used in installation procedures to get the status of the
installation procedure. The status is based on the existing function:
usage: install_searx_get_state
Prompts a string indicating the status of the installation procedure
missing-searx-clone:
There is no clone at ${SEARX_SRC}
missing-searx-pyenv:
There is no pyenv in ${SEARX_PYENV}
installer-modified:
There are files modified locally in the installer (clone),
see ${SEARX_SRC_INIT_FILES} description.
python-installed:
Scripts can be executed in instance's environment
- user: ${SERVICE_USER}
- pyenv: ${SEARX_PYENV}
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
In commit 94851790 we have centralized all SearXNG setups in the settings.yml
file:
94851790 [mod] move brand options from Makefile to settings.yml
This step has not yet been completed for the installation procedures! Since all
SearXNG setups are done in the settings.yml these environment variables needs to
be removed from the ./conf.sh file. Scripts and other tasks running outside of
an instance got the needed values from the ./utils/brand.env file.
By example: ATM the environment variables of the ./config.sh file are in
conflict with them from settings.yml:
- PUBLIC_URL --> {server:base_url}
- SEARX_INTERNAL_HTTP --> {server:bind_address}.{server:port}
- GIT_BRANCH --> {brand:GIT_URL}
These environment variable of a SearXNG instance and additional
- SEARX_SETTINGS_TEMPLATE
has been remove from the '.config.sh' file. With this patch, the main focus of
./conf.sh resists on environment variables needed for the installation of morty,
filtron software.
modified .config.sh:
- removed no longer supported variables (see above)
- add comment about: SearXNG setup in settings.yml
modified utils/searx.sh:
- SEARX_INTERNAL_HTTP no longer take from .config.sh
- SEARX_SETTINGS_PATH /etc/searx/settings.yml
- SEARX_SETTINGS_TEMPLATE obsolete
modified utils/lib_install.sh:
Initialize environment variables SEARX_PYENV, SEARX_SETTINGS_PATH and
PUBLIC_URL.
modified: utils/morty.sh
Add missing hint about SEARX_SETTINGS_PATH and move PUBLIC_URL to
utils/lib_install.sh
modified: utils/morty.sh
Move PUBLIC_URL to utils/lib_install.sh
Renamed utils/templates/etc/searx/use_default_settings.yml -> settings.yml
- removed option which can't be modified after installation
- add some comments with examples
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
modified docs/admin/engines/settings.rst
- Fix documentation and add section 'brand'.
- Add remarks about **buildenv** variables.
- Add remarks about settings from environment variables $SEARX_DEBUG,
$SEARX_PORT, $SEARX_BIND_ADDRESS and $SEARX_SECRET
modified docs/admin/installation-searx.rst & docs/build-templates/searx.rst
Fix template location /templates/etc/searx/settings.yml
modified docs/dev/makefile.rst
Add description of the 'make buildenv' target and describe
- we have all SearXNG setups are centralized in the settings.yml file
- why some tasks need a utils/brand.env (aka instance's buildenv)
modified manage
Settings file from repository's working tree are used by default and
ask user if a /etc/searx/settings.yml file exists.
modified searx/settings.yml
Add comments about when it is needed to run 'make buildenv'
modified searx/settings_defaults.py
Default for server:port is taken from enviroment variable SEARX_PORT.
modified utils/build_env.py
- Some defaults in the settings.yml are taken from the environment,
e.g. SEARX_BIND_ADDRESS (searx.settings_defaults.SHEMA). When the
'brand.env' file is created these enviroment variables should be
unset first.
- The CONTACT_URL enviroment is not needed in the utils/brand.env
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
**new** utils/lib_install.sh:
Used to initialize installation procedures
- Modified source_dot_config function that
- loads .config.sh from an existing installation (at SEARX_SRC).
- initialize **SEARX_SRC_INIT_FILES**
- functions like:
- install_log_searx_instance()
- install_searx_get_state()
**modified** utils/searx.sh
- obsolete environment SEARX_INSTANCE_NAME has been replaced
by string 'SearXNG'.
**modified** utils/filtron.sh, utils/morty.sh, utils/searx.sh
- source utils/lib_install.sh
- normalize logging of environment variables using new function
install_log_searx_instance()
**modified** utils/lib.sh
- fix marginal typos
**Installation scripts**
The utils/lib_install.sh is sourced by the installations scripts:
- utils/searx.sh
- utils/morty.sh
- utils/filtron.sh
If '${SEARX_SRC}/.config.sh' exists, the modified source_dot_config() function
loads this configuration (instead of './.config.sh').
**SEARX_SRC_INIT_FILES**
Array of file names to sync into a installation at $SEARX_SRC. The file names
are relative to the $REPO_ROOT. Set by function init_SEARX_SRC_INIT_FILES().
Most often theses are files like:
- .config.sh
- searx/settings.yml
- utils/brand.env
- ...
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Prompt the verbose messages ...
PYENV [check] import yaml --> OK
PYENV OK
only when environment $VERBOSE is active.
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Added function searx.get_setting(name, default=_unset):
Returns the value to which ``name`` point. If there is no such name in the
settings and the ``default`` is unset, a KeyError exception is raised.
In all the python processes ..
- make docs
- make buildenv
- make install (setup.py)
the usage of the 'brand.*' name space is replaced by 'searx.get_setting'
function.
- brand.SEARX_URL --> get_setting('server.base_url')
- brand.GIT_URL --> get_setting('brand.git_url')
- brand.GIT_BRANCH' --> get_setting('server.base_url')
- brand.ISSUE_URL --> get_setting('brand.issue_url')
- brand.DOCS_URL --> get_setting('brand.docs_url')
- brand.PUBLIC_INSTANCES --> get_setting('brand.public_instances')
- brand.CONTACT_URL --> get_setting('general.contact_url', '')
- brand.WIKI_URL --> get_setting('brand.wiki_url')
- brand.TWITTER_URL --> get_setting('brand.twitter_url', '')
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
From pacman's man page:
--noprogressbar
Do not show a progress bar when downloading files. This can be useful for
scripts that call pacman and capture the output.
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
In 2a12637 an ASCII escape code was added, such escape codes should not be
written to pipes (when the output is not a terminal).
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Some piped commands hide the cursor, show cursory when the stream ends.
Most often this is a bug of the command which piped. The command should not
hide the cursor when it writes to a pipe. I have seen this bug with the package
manager (pacman) from ArchLinux.
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
The functions:
- static.build.commit
- static.build.commit.drop
- static.build.restore
are imported into the ./manage script. To avoid name collisions some variables
and fucntions has been renamed by adding the prefix *static_*.
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Marginal simplification of the procedure to get only the last local commit which
is not in remotes.
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
- add script to shellcheck,
- fix error messages from shellcheck and
- moved global variables to local variables (lower case)
No functional change!
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
The idea is to avoid conflict when there are differents branches with changes are made on the static files.
A solution is to ask the administrators to build the files from the sources, but it requires to install the npm dependencies.
So the solution in this commit keep the sources and the build files in the same git repository.
In one branch, the modification of the source (*.less, *.js) are commited without the built files.
The built files are commited in a uniq commit, with a commit message "Static build"
In case of merge or rebase, this commit can be dropped.
New make targets:
* static.build.commit.drop:
drop the last "Static build".
The command checks that there are only build files in the commit.
* static.build.commit :
call "make static.build.commit.drop"
call "make themes.all"
commit the files
* static.git.restore.staged:
git restore --staged <build files>
* static.git.restore:
git restore <build files>
Related to https://github.com/searxng/searxng/issues/137
Docker is blocking network of existing LXC containers / there is a conflict in
the iptables setup of Docker & LXC. With this patch:
- utils/lxc.sh checks internet connectivity (instead of silently hang)
- Chapter "Internet Connectivity & Docker" describes the problem and made a
suggestion for a solution a solution
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
In 5a7b12ee we changed the signature of the YAML settings, this patch takes this
into account.
Related-to: 5a7b12ee [yamllint] searx/settings.yml
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
The node.env build environment require npm, ttfautohint and fontforge installed
in the OS. These tools can be installed by::
sudo -H ./utils/searx.sh install buildhost
If one of the tools is not installed, the script node.env stops with a
appropriate message.
BTW: We ignore CentOS-7 as developer & build platform
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
This file is generated by webfont.
* It is now generated as searx/static/themes/simple/ion.less
* It is generated before the .less compilation.
* .gitignore includes this file
Add two new package depedencies: fontforge ttfautohint
See utils/searx.sh
The public URL of the searx instance: PUBLIC_URL="https://mydomain.xy/searx"
The default is SEARX_URL which is taken from ./utils/brand.env.
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Access to formats can be denied by settings configuration::
search:
formats: [html, csv, json, rss]
Closes: https://github.com/searxng/searxng/issues/95
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
To select a different file with filtron rules, set environment
FILTRON_RULES_TEMPLATE
the default is
utils/templates/etc/filtron/rules.json
The installation is done by the new function install_rules() which offers a
multiple choice in case of collisions (known from searx.sh install setup).
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Implement a boilerplate to manage performance optimized virtualenv builds.
Shell scripts can use (e.g.) 'pyenv.cmd' to execute command in the virtualenv
without having to worry about whether and how the environment is provided. ::
pyenv.cmd which python
..../local/py3/bin/python
pyenv.cmd which pip
..../local/py3/bin/pip
If pyenv.cmd released multiple times the installation will only rebuild if the
function 'pyenv.OK' fails. Function 'pyenv.OK' make some test to validate that
the virtualenv exists and works as expected. The check also fails if
requirements listed requirements-dev.txt and requirements.txt has been edited.
Among these tests 'pyenv.OK' calls 'pyenv.check' which implements a python
script that validate the python installation. Here is an example how a
'pyenv.check' implementation could look like::
pyenv.check() {
cat <<EOF
import yaml
print('import yaml --> OK')
EOF
}
Signed-off-by: Markus Heiser <markus@darmarit.de>
Newer CentOS-7 images from https://images.linuxcontainers.org do no longer
include the which command.
Issue:
$ sudo -H ./utils/lxc.sh cmd searx-centos7 ./utils/filtron.sh install all
INFO: [searx-centos7] ./utils/filtron.sh install all
...
Install Go in user's HOME
-------------------------
download and install go binary ..
...
-bash: line 1: which: command not found
-->|ERROR - Go Installation not found in PATH!?!
-bash: line 2: which: command not found
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Markus Heiser
Alexandre Flament
Markus Heiser
3nprob
Alex Balgavy